Most woodworkers love their power tools, but good hand tools are just as necessary. In fact, years ago, our forefathers accomplished many wonderful things using hand tools only. One essential hand tool you’ll need for the workshop is a claw hammer. Most people have used one at some time in their lives. Choose yours to feel comfortable in your hand and not be too heavy. A rubber mallet is also handy to use when you want to fit something together without leaving any marks on it.
A Speed Square can be used to quickly mark a square line across the end cut of a piece of lumber, or any other angle you require, up to 45%. Even more versatile, a sliding bevel is handy for duplicating angles as it can be locked in place. It can also be adjusted for any angle.
A retractable tape measure with both Metric and Standard markings on it is another tool you will use constantly, while a utility knife with a retractable blade will have many uses such as marking lumber or cleaning a hinge mortise.
Chisels and screwdrivers are always in use and every woodworker should have a good basic set of each. Screwdrivers will need to be both the Phillips and Flathead types. A level is another necessary part of the woodworker’s basic tool set. Most things you make need to have their horizontal or vertical level taken. One long and one short will be most useful.
Nail sets are used to sink nail heads just below the surface of the lumber. Keep a variety of sizes to suit the job in hand. A small block plane is another essential tool to shave that thin sliver of wood off your stock.
You may decide a handsaw is necessary for your workshop. There are many varieties such as coping saw, pull saw, compass saw, keyhole saw and of course large and small crosscut saws. What you need will depend a lot on the type of work you intend to do. Other essential things to have are files, rasps, pliers and sanding blocks.
Last but not least is a large piece of pegboard to hang your tools on, keeping them handy for your use and safely out of the way of little fingers. For those tools that won’t hang, a lockable cupboard is the way to go. Shelving may seem easy to store things on, but they’ll get covered in dust and sawdust and be easier for children to get at.
 |
16Speed Drill Press, Floor Model. Brand New!!!!!!1 US $159.99 (0 Bid) End Date: Monday Jan-05-2009 20:40:15 PST Bid now | Buy it now | Add to watch list |
 |
Sandpaper belts 3" x 18" 50 Grit FREE SHIPPING US $7.99 (0 Bid) End Date: Monday Jan-05-2009 20:54:38 PST Bid now | Buy it now | Add to watch list |
 |
22CNC Solid Carbide Flat UpDown Compression Spiral 3/8 US $200.00 (0 Bid) End Date: Monday Jan-05-2009 20:59:48 PST Bid now | Buy it now | Add to watch list |
 |
Exotic Curley Bubinga veneer 18 @ 9 1/2" x 27 US $29.95 (0 Bid) End Date: Monday Jan-05-2009 21:09:46 PST Bid now | Add to watch list |
 |
ROUTER BITS SIGN MAKING CARBIDE 6 PC 1/4" WOODWORKING US $13.99 (0 Bid) End Date: Monday Jan-05-2009 21:18:19 PST Bid now | Add to watch list |
 |
LOT OF 6 CHISELS WOOD CHISEL TOOL SET WOODWORKING TOOLS US $7.32 (2 Bids) End Date: Monday Jan-05-2009 21:26:52 PST Bid now | Add to watch list |
 |
4 pcs of 3/8" ACME nut for CNC router CNC Foam cutter US $40.00 End Date: Monday Jan-05-2009 22:09:10 PST Buy it now | Add to watch list |
 |
Dual Wood Moisture Meter w/ Thermometer 4 Cotton Paper US $61.90 End Date: Monday Jan-05-2009 22:13:14 PST Buy it now | Add to watch list |
 |
Freud dado set US $59.00 (0 Bid) End Date: Monday Jan-05-2009 22:18:02 PST Bid now | Add to watch list |
 |
0139 Anigre veneer nice figure 53 sqft. US $23.99 End Date: Monday Jan-05-2009 22:24:32 PST Buy it now | Add to watch list |
 |
Dynabrade 40600 Dynafile II Electric Belt Sander NEW US $219.95 End Date: Monday Jan-05-2009 22:33:25 PST Buy it now | Add to watch list |
 |
6945 Madrona burl veneer pink/blue color 18 sqft. US $9.99 End Date: Monday Jan-05-2009 22:38:31 PST Buy it now | Add to watch list |
 |
CNC Plasma/Wood XYZ Router System XY Table 55"inch Long US $75.00 (1 Bid) End Date: Monday Jan-05-2009 23:13:06 PST Bid now | Add to watch list |
 |
12" Rockwell Disc.Sander US $99.99 (1 Bid) End Date: Monday Jan-05-2009 23:33:22 PST Bid now | Add to watch list |
 |
Bosch Ogee panel bit 3-1/2" US $20.00 (0 Bid) End Date: Tuesday Jan-06-2009 0:31:24 PST Bid now | Add to watch list |
 |
5 X 1/8" CNC Single Flute Carbide Router Bits Tool New US $10.99 (0 Bid) End Date: Tuesday Jan-06-2009 2:25:55 PST Bid now | Add to watch list |
 |
DELTA SIDEKICK FRAME & TRIM SAW US $125.00 (0 Bid) End Date: Tuesday Jan-06-2009 4:14:47 PST Bid now | Add to watch list |
 |
DELTA 10" RADIAL ARM SAW US $300.00 (1 Bid) End Date: Tuesday Jan-06-2009 4:16:59 PST Bid now | Add to watch list |
 |
New Greelee 3/4 X 18" Nail Eater Wood Boring Bit #30923 US $19.99 (0 Bid) End Date: Tuesday Jan-06-2009 4:32:16 PST Bid now | Add to watch list |
 |
New Greelee 5/8 X 18" Nail Eater Wood Boring Bit #30919 US $19.99 (0 Bid) End Date: Tuesday Jan-06-2009 4:32:18 PST Bid now | Add to watch list |
 |
New Greenlee 7/8 X 18 Nail Eater Wood Boring Bit #30927 US $19.99 (0 Bid) End Date: Tuesday Jan-06-2009 4:32:19 PST Bid now | Add to watch list |
 |
SawTrax C64B 64" Panel Saw w/ 5 ft frame (New) US $1,819.00 End Date: Tuesday Jan-06-2009 5:30:00 PST Buy it now | Add to watch list |
 |
SawTrax FS52B 52" Panel Saw w/ 10 ft frame (New) US $2,114.00 End Date: Tuesday Jan-06-2009 5:30:00 PST Buy it now | Add to watch list |
 |
SawTrax FS64B 64" Panel Saw w/ 10 ft frame (New) US $2,339.00 End Date: Tuesday Jan-06-2009 5:30:01 PST Buy it now | Add to watch list |
 |
SawTrax FS76B 76" Panel Saw w/ 10 ft frame (New) US $2,519.00 End Date: Tuesday Jan-06-2009 5:30:02 PST Buy it now | Add to watch list |